Home

Building The
 650 Horse
 388 Chevy SB

Building A 383
 CID with 6
 00 Horse Power
 on A Budget 

Building The
Hi-Performance
Ford 351-W SB

The 800 HP
 460 / 520
 Big Block Ford

Building
The 800-Plus HP
Chevy Big Block

Building the
Super Hi-Performance
400 Chevy SB

Understanding
Performance
Carburetors

Hi-Performance
Cylinder Heads

Understanding the
9 Inch Ford
Rear End

Understanding
Nitrous Oxide

Understanding
Jr. Drag Racing

Understanding
Cam and
Valvetrain

Building the
Hi-Performance
Powerglide

HP 350 Turbo 
Racing
Automatic
Transmission

Building the
High Performance
Racing 400 Turbo

How To Build
 An  Engine
Testing Stand

 

 

 

Understanding Cam and Valve Train

 

$33.00

                      

This 93 minute video shows the complete cam and valve train installation and set-up. You will see all components up close and in great detail.

Sprint car and dragster owner Wayne Partridge who builds his own race winning engines walks you through each step of the installation, degreeing and valve train assembly. You will install a Crane 714 lift roller cam, install the cam gears and chain, degree the cam using degree wheel and dial indicator, drill cam sprocket and install off set bushings to advance or retard your cam, learn how to advance or retard your cam by using a multi-keyway crank sprocket, install and set valve springs to proper installed and open heights, find proper pushrod length, set up screw in studs and guide plates, retainers, proper way to set and adjust valves, check valve to piston clearance, damper and proper installation, stud girdle stabilizer installation and much more.

Every step and every component shown and explained step by step and in the greatest of detail. Nothing left out. The most exhaustive video every produced on cam and valve train. Partridge tells how and when to advance or retard the cam and what effect it has on the engine. The degreeing process is shown in such detail with a degree wheel, dial indicator, charts and every step explained so anyone can understand it.